| S No |
Description of items |
Qty |
Rate |
Unit |
1.
|
Providing wood work in frames of false ceiling, partitions etc. swan and put up in position: Kiln seasoned and chemically treated hollock wood
|
1.8 cum |
|
cum |
| 2. |
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position: Sal wood
|
0.30 cum |
|
cum |
| 3 |
Providing and fixing wooden molded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete Hollock wood 50 x 12 mm
|
10.00 m |
|
m |
| 4 |
Providing & fixing vertical blinds 100 mm wide strips of approved fabric of approved quality (vista leveler or equivalent ) of its exiting pattern locking arrangement of opening & closing top & bottom rail fixing with nylon rope etc. complete as per the directions of Engineer-in-charge.
|
18.00 Sqm |
|
Sqm |
| 5 |
Providing and fixing ISI marked flush door shutters confirming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on the both faces of shutters :35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
|
11.00 Sqm |
|
Sqm |
| 6 |
Providing and fixing M. S. grills of required pattern in frames of windows etc. with M. S. flats, square or round bars etc. all complete Fixed to steel windows by welding |
15.00 kg |
|
kg |
| 7 |
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality)
|
5.00 Nos |
|
Each |
| 8 |
Providing and fixing IS :3564 marked aluminium extruded section body tubular type universal hydraulic door with double speed adjustment with necessaries and screws etc. complete.
|
3.00 Nos |
|
Each |
| 9 |
Providing and fixing ISI: 12817 marked Stainless steel Butt Hinges with Stainless Steel screws etc., complete. 125 x 64x 1.90 mm
|
18.00 Nos |
|
Each |
| 10 |
Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 per IS :1868) transparent or dyed to required color or shade with necessary screws etc. complete : 250 x 10 mm
|
10.00 Nos |
|
Each |
| 11 |
Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required color or shade with necessary screws etc. complete : 125 mm
|
12.00Nos |
|
Each |
| 12 |
Providing and fixing aluminum hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color and shade with necessary screws etc. complete : Twin rubber stopper
|
5.00 Nos |
|
Each |
| 13 |
Fixing chokhats in existing opening including embedding chowkhat in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks with cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) painting two coats of coal tar to sides of chowkhats and making good the damages to wall and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead : Door chowkhats
|
6.00 Nos |
|
Each |
| 14 |
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead as per direction of Engineer-in-charge. : Of area 3 sq. meters and below.
|
15.00 Nos |
|
Each |
| 15 |
Dismantling aluminum/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
|
110.00 Sqm |
|
Sqm |
| 16 |
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level over first class kali wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) : Flat surfaces
|
110.00 Sqm |
|
Sqm |
| 17 |
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
|
50.00 Sqm |
|
Sqm |
| 18 |
Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats)
|
110.00 Sqm |
|
Sqm |
| 19 |
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
|
110.00 Sqm |
|
Sqm |
| 20 |
Providing and fixing glazing in aluminum door, windows, ventilator shutters and partitions etc. with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminum snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness.
|
36.00 Sqm |
|
Sqm |
| 21 |
Providing and fixing anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285 fixed with rawl plugs and stainless steel screws etc.
|
305.00 kg |
|
kg |
