India Trade Promotion Organisation, a Government of India
Enterprise invites quotations in sealed cover, as per job sheet
attached for inspection, repairing, refilling and repainting,
maintenance of Fire Fighting Equipments as per ISI Norms.
1. The quotation should be sent alongwith earnest money deposit
for Rs.3,000/- (Rs. Three thousand only) through a demand draft in
favour of India Trade Promotion Organisation, New Delhi. Cheques will
not be accepted.
2. The quotation in sealed cover should be addressed to the
Manager (Stores), India Trade Promotion Organisation, Prantik
Building, Near Gate No.1, Pragati Maidan, New Delhi-110001 so as to
reach this office latest by 3.00 pm on or before 31.7.2008 and will be
opened at 4.00 pm on the same day. Quotations received after the
stipulated date and time and without earnest money will not be
considered.
3. The job has to be completed within 30 days from the date of
issue of order. In case of failure to complete the work in time the
earnest money will be forfeited.
4. The work after completion will be subject to the inspection of
Senior Manager of the Security Division of ITPO.
5. The contractor must have PAN Number and registered with
concerned Tax Authority as applicable. (Photocopy should be attached
with quotation)
6. The quoted rates will be valid for a period of one year. The
performance guarantee has to be furnished for each Fire Extinguisher
refilled/repaired for a period of one year as per ISI norms. In case
any Fire Extinguisher found not working during the guarantee period,
the same will have to be refilled/repaired free of cost immediately.
7. The earnest money of the successful bidder will be covered as
Security Money till the guarantee period.
8. ITPO reserves the right to reject any quotation in full or part
thereof without assigning any reason and no correspondence will be
made in this regard.
9. The contractor must have their own workshop with facilities
such as hydraulic testing, gas filling etc.
JOB SHEET OF REPAIR/REFILLING, PAINTING &
MAINTENANCE OF FIRE EXTINGUISHERS
| S.No. |
Particulars Rate Per Unit (In Rs.) |
| A. |
REFILLING OF FIRE EXTINGUISHERS |
| 1. |
Soda Acid – 9 Ltrs. Capacity |
| 2. |
Foam Type – 9 Ltrs. Capacity |
| 3. |
Water CO2 – 9 Ltrs. Capacity |
| 4. |
DCP Gas Cartridge Pressure – 2 kg. |
| 5. |
DCP Gas Cartridge Pressure – 5 kg. |
| 6. |
DCP Gas Cartridge Pressure-10 kg. |
| 7. |
CO2 – 2.2. kg. |
| 8. |
CO2-3.20 kg. |
| 9. |
CO2-4.5 kg. |
| 10. |
CO2-6.8 kg |
| 11. |
Halon-1.25 kg. |
| 12. |
Halon-2.5 kg. |
| 13. |
Halon-5 kg. |
| 14. |
ABC Type-5 kg.
|
| |
|
| B. |
SPARE PARTS OF FIRE EXTINGUISHERS |
| 1. |
GM Union Cap for DCP-2 kg. |
| 2. |
GM Union Cap for DCP/ABC – 5 kg. |
| 3. |
GM Union Cap for DCP-10 kg. |
| 4. |
GM union Cap for Water CO2- 9 Ltrs. |
| 5. |
GM Union Cap for Soda Acid- 9 Ltrs. |
| 6. |
Brass Union Cap for DCP-2 kg. |
| 7. |
Brass Union cap for DCP/ABC – 5 kg. |
| 8. |
Brass Union Cap for DCP-10 kg. |
| 9. |
Brass Union Cap for water CO2-9 ltrs. |
| 10. |
Brass Union Cap for Soda Acid – 9 ltrs. |
| 11. |
Union Safety Valve (ISI) for CO2 |
| 12. |
Discharges horn for CO2-2.2 kg./3.2 kg. |
| 13. |
Discharges horn for CO2 4.5 kg./6.8 kg. |
| 14. |
Discharge horn for water CO2- 9 ltrs. |
| 15. |
Discharge horn for DCP-2 kg. |
| 16. |
Discharge horn for DCP/ABC-5 kg |
| 17. |
Discharge horn for DCP-10 kg. |
| 18. |
Washers for Union Cap |
| 19. |
Union and safety clips for DCP/CO2
Water CO2/ABC |
| 20. |
Direct Nozzle for Soda Acid |
| 21. |
Direct Nozzle for Foam Type |
| 22. |
Jali for Soda Acid |
| 23. |
Container for Foam Type |
| 24. |
Inner Cage for Soda Acid |
| 25. |
Brass Cap for Foam Type |
| 26. |
Wall Bracket for all type of extinguishers |
| 27. |
Brass Plunger Rod for Soda Acid- 9 Ltrs. |
| 28. |
Brass Plunger Rod for Foam Type – 9 ltrs. |
| 29. |
Direct Nozzle for DCP/ABC-5 kg. |
| 30. |
CO2 Gas Cartridge for water CO2 |
| 31. |
CO2 Gas Cartridges for DCP- 2 kgs. |
| 32. |
CO2 Gas Cartridge for DCP/ABC – 5 kgs. |
| 33. |
CO2 Gas Cartridge for DCP-10 kgs. |
| |
|
| C. |
OTHER JOBS |
| 1. |
Hydraulic Pressure testing for all type extinguishers |
| 2. |
Repainting of all type of fire extinguishers |
| 3. |
Repainting of all type of fire buckets |
| 4. |
Repainting of all type of fire stands |
| 5. |
Repainting of all type of Drums |
| 6. |
Polishing of Cronum plated on bells and caps etc. |
| 7. |
Labels for instructions for all type of fire extinguishers |
| 8. |
Sticking of ITPO Logo Stickers |
| 9. |
Fire Point Stickers (On Yellow back ground with
red letters) |
Name & Address of the party:
Signature of the party: